Essential Steps for Fake Grass Installation
Who wouldn’t like to have a lawn or an indoor stadium where the grass is always fresh, evenly green and looks great at all times? Well, in reality, it is simply impossible to possess that kind of a lawn. After all, it is tough to maintain grass as per the changing weather and keep the adequate moisture level. Do not make up your mind unless you have heard about fake grass installation.
 |
| Fake Grass |
Get in touch with one of the leading fake grass installation companies to know more about the grass and how you can now finally have a green lawn made of fake grass. The best part is that this grass will remain clean and fresh the whole year-round and there is no need to water the grass too. However, you just need to be sure that you buy quality fake grass and ensure that the installation process is of a high standard.
Essential steps to follow when thinking of fake grass installation.
- Make accurate measurements- Measure the height, width, and length of the area you need to cover with the fake grass. You also need to keep in mind the kind of grass blades you need, the length, the width, and the slanting of the blades, to get that perfect look you are looking for.
- Prepare the surface- Get rid of any existing surface, and if the area is smaller, you can do it on your own. However, for larger areas, you need to hire a turf cutter. Use a vibrating plate or roller to smooth out the surface and make it compact. You can hire professional services or the equipment as per your needs.
- Clean the area- Before grass installation, ensure that the area has been cleaned thoroughly and any kind of debris is removed. The surface should be firm, strong, and free of any cracks before laying the artificial grass. Use special equipment and material to keep the area free of any remains or fragments of dirt.
- Build a firm base- Place the concrete or stone base on the surface areas and this will take a few days. The surface has to be set and completely dry. One may have to use a vibrating plate or roller to smoothen out any bumps or rough surfaces in that area.
- Place the performance pad – Now that the concrete surface is ready, it is time to place the performance pad for support and cushioning. For larger areas, it is a must to get performance pads for cushioning. Glues and tape are used to place the performance pad and roll it out on the area for fake grass installation.
- Roll out the turf- Now, it is time for installation of the fake grass turf, and all you need to do is roll out the turf on the area that you wish to cover. It is a good idea to leave the turf for about a couple of hours to let it settle in and get used to the new area. This is recommended to avoid any wrinkling or creasing later on.
- Cutting and trimming- Based on the area you need to cover, you may have to cut and trim the edges of the fake grass. You can use a sharp knife to cut the corners and ensure that the task is done neatly. The edging should not be higher than the final grass line.
- Keep the grass together- Follow the instructions carefully when you join the grass patches. Use our high-quality tape and glue for outdoor purposes, and it is a good idea to place some weight on the grass edges when you pull them together.
 |
| Fake Grass |
For fake grass installation, it is suggested that the grass with the pile should lean towards the house to give that natural look. You can buy fake grass with some brown patches to get that realistic look for your lawn. It always a good idea to hire professionals for fake grass installation to get a better result.
0 comments
Note: only a member of this blog may post a comment.