Qualifications Which Determine the Best Safety Anchor Points By Constructional Workers
The fall protection system is a must for your esteemed and hardworking constructional workers. It is indeed your personal form of fall protection system which is noted to be as strong as the available components. So, the selection of a proper and ideal anchor point for the current system is always the major part of protecting you and also your workers from any fall hazards. But there are plenty available in the market. So, it is advisable to think twice. The main question of what should be the components which can make the best and the most suitable safety anchor points. Now, as per the OSHA, the parameters revolving around a safer anchorage point is the one, which is able to support a minimum of 5000 pounds per employee attached. There cannot be any change in it. Further, the item can be designed, installed and also used as a major part of complete fall arrest, which will help to maintain a safety factor of minimum two, under supervision of a strict qualified person that’s for sure.
 |
| Fall Protection System |
Moreover, the anchor points are to be rigid enough and must not have that deflection greater than .04 inches at the time when a force of 2250 pounds is applied on the same. There are, in fact, around 9 out of 10 people who are willing to survey the construction location and they are not engineers. Therefore, it is wise to make sure that you have the options to save their lives and also that of the working employees. So, selection of best the anchor points is the need of the hour.
The System’s Design Plays A Vital Role:
What matters is the design of the safety anchor points. It is indeed one of the major factors which determine the safety notion of it. As it has been mentioned, the design of the system to a safety factor of minimum two under supervision of trained personnel is only mandatory to a qualified person which, engineers the complete fall protective gears. So, as long as the person who is designing the system is a qualified person according to ANSI and OSHA, they can be able to create complete fall arrest system with a safety notion added to it. On the other hand, the engineer needs to be in conformance with a qualified person requirement, as placed by OSHA. It implies that there should be good communication and cooperation regarding this.
In fact, according to the Construction Safety Council which deals with safety anchor points, the structural requirements are subject to vary, based on the approach as used to select anchor point. Remember this point.
 |
| Safety Anchor Points |
Advantages And Disadvantages
The safety anchor points or the personal fall protective gears will be as food as a tie off or anchor point that you plan to choose. In fact, there are some workers who will certainly believe that some points are safe, and they will not even hold them even if they fall. Since there are some workers who attach lanyards to overhead pipe with the thought of it being enough as protective gear, but the reality is a little bit different here. Anchor points which are designed for the lanyards need to be rated to withstand a pressure of 5000 pounds.
- Do you know why 5000 pounds for safety anchor points? In fact, an average worker is able to generate high arrest forces from relative short falls. As an example, someone with a weight of 214 pounds and 5 feet in height can very easily generate over 2500 pounds of force. Using the present 2:1 factor will equate to around 5000 pounds of force.
- Another most interesting thing is how fast people might fall. Most of the time it has been seen that during the training periods, participants think they can catch themselves, but it is not true. Within a span of 2 seconds, they get to travel around 44 miles per hours approximately and will fall 65 feet. So, looking for safety gears at that point is important. It is not wise to risk lives based on assumptions.
So, look out for these points before going for perfect safety anchor points.
0 comments
Note: only a member of this blog may post a comment.