­
How using Industrial Fans can increase your productivity - Intriguing Aussie Portal -->

How using Industrial Fans can increase your productivity

by - January 17, 2022

All industries need industry fans to ensure proper ventilation for the well being of the employees and customers. Industries like chemical, medical, automotive, agriculture, mining, food processing, construction industries can use industrial fans. Not only that, the storehouse and underground parking lots also require Industrial fans. 

Why industrial fans are are better to use?

  1. Stay longer and require minimal power source 
  2. They have a robust motor 
  3. They will bearing heavy loads ,more rugged welding and construction
  4. They provide proper ventilation throughout the space and keeping air clean for employees and customers.
  5. Healthier air that leads to fewer sick workers and high productivity.
  6. It takes a very little power to use one large fan so you will pay smaller bills. 
  7. Large fans whisper –quiet when it runs. 
  8. Blocking problem in large fans is less. 
  9. They can be use to move waron air down to lower level in winter to save even energy. 

Different types of industrial fans: They are generally categorized into 3 types-

1. Axial flow fan: It uses a propeller to draw the air in it, and it exist in the same way. There are three basic types. Propeller, tube axial and vane axial; Propeller fans are used for cooling. They are attached to the wall. 

2. Centrifugal fans: it blows air at right angles to the outwards of the fan base and rotates the air into the area with the deviation and central force. They are of different types like forward curved centrifugal fan, backward curved centrifugal, cross flow fans ,and radial fans. 

3. Mixed Flow Fan: The mixed fan flow air in the axial direction where it is occupied by hybrid design impeller blades with axial and radial features that divert air in outwards direction by diagonal angle in the region of 45 degree. They have very high efficiency. They do not put a load on power supply. 

Uses and benefits of Industrial fans

  • They Provide air and gas movement
  • They provide fresh air 
  • They can be used in many cooling and drying areas at many construction sites where patrons are hot. 
  • They help to reduce humidity levels in nursing and bathrooms. 
  • They help to remove smoke and odors. 
  • They help in controlling electrical emissions in the chemical industry and in automotive stores.
  • It saves the lives of employees and customers 
  • It comes in a variety of sizes and types and uses.

How to choose the best fan?

There are different steps to choose the best fan:

1. Types of fan: They do not work in the same way. As mentioned above there are 3 general categories like axial. Mixed and centrifugal fans; your first step is to determine the type of air movement and type of fan you need.

2. ducting: consideration should be given to effectiveness and efficiency. It will contribute to the construction in terms of total cost, the fan integration and operating cost.

3. Total air flow: IT is measured in cubic feet of air per minute. When delivering goods, make sure there is enough CFM for the pipeline,

4. Static pressure: Resistance to air flow, or static pressure, is caused by air flowing through the pipe, hose, duct filter and other elements.

5. Density: It changes due to temperature and or barometer pressure variations must be adjusted. 

6. Air temperature: The temperature of the air adjusted passing through the fan will affect the operation of the fan.

7. Material handling: If material is to be transmitted through a fan, the material character must be considered. 

8. Safety condition: Special accommodation may be required if any item is new.

Conclusion

When it comes to choosing an Industrial fan, you should choose a large fan which can make a huge difference in your bills, safety and productivity.

You May Also Like

0 comments

Note: only a member of this blog may post a comment.