Methods Used By Professionals To Clean Blocked Drains!
You must have come across several websites claiming that cleaning a blocked drain is an easy job and anyone can do it on their own. There are so many articles, videos, blogs, and vlogs on the internet which mention several DIY tricks that promise to provide quick and effective results. But that is not always the case. These tricks are nowhere close to the methods used by professionals to clean blocked drains. Before going on to know about the methods, we must understand the causes of blocked drains.
Why Do Drains Get Blocked?
Blocked drains are not a result of a one-day affair. It takes a lot of time for the sludge to accumulate and clog your drains. As the sludge starts to accumulate, the space inside the pipe starts to reduce slowly. As a result, the water flow is constricted, and drains get blocked. Even if you try to unclog blocked drains on your own, you might not be able to clean the sludge properly and there is a chance that some sludge may be left behind. This is detrimental as it allows your drains to get blocked again. The only way it won’t be is if you choose to hire professionals. They know the correct ways to unclog blocked drains.
What Methods Are Used by professionals?
Out of the many methods that can be found on the internet, these are the top three methods that are used by all professionals. Depending on the extent of damage, one of these methods is used. These methods are:
- Using A Hydro-Jetter: In this method, cleaning professionals are using hot water to clean blocked drains. The water is sprayed at the drain at high speed from a tiny nozzle, and it helps to unclog all kinds of blocked drains. High-pressure water helps to remove the toughest particles and ensures that it does not return for a long period of time. Since the pressure of the water that is being used is important, it is recommended that only professionals use a hydro-jetter. Controlling the pressure of the water takes years of practice and cannot be done by laymen.
- Using Drain Augers: One of the most common and effective methods of cleaning a blocked drain is by using augers. In case you have ever seen blocked drains, cleaning professionals using a long, wire-like corkscrew, then drain augers are being used. These augers are motorized and should be only handled by professionals. This wire-like equipment works in two ways – either it breaks the dirt particles up, or it draws it away from the drain. There are blades attached to it that help with the cleaning and unclogging. However, it does not work in severe clogging cases.
- Cleaner with A Video Camera: Sometimes a lot more than just grease and dirt can block your drains. The professionals need to know the cause before they can take proper actions. For this reason, cleaners with a video camera attached to it are used. These cleaners are inserted into the drain. The LED light fixed at the top of the cleaner, help the professionals to have a closer look at the obstruction. It not only helps them to clean blocked drains but prevents it from getting damaged in the future.
If block drains are left unattended, it can lead to bigger problems. Water will not pass, and it can cause damage to your place. Moreover, if it gets damaged a lot, you might need to repair the entire house. Start looking for the right company today! It is recommended that you do not opt for a DIY method. Cleaning a blocked drain is not a simple task because drainage systems are complex. Do not forget to read reviews and only then make your choice!
0 comments
Note: only a member of this blog may post a comment.