Here Are the Top Reasons to Do Heritage Window Repair
It is no wonder the heritage of our nation is totally based on historic buildings and monuments. For this reason, the preservation of these buildings has become very important. Over time the buildings start depreciating. To avoid this, regular and proper maintenance becomes inevitable. Each and every part of the historic buildings should be checked thoroughly, including doors, windows, pillars, floor steps, etc. Heritage Window Repair involves repairing the windows of these historic buildings and monuments. Repairing of the windows increases the beauty of the buildings and preserves the culture and tradition of that era. Woods was the main material used for constructing the windows in the ancient period. To avoid the wear and tear of these wooden windows, proper upkeep is required.
Here are some certain steps to follow for Heritage Window Repair
#1 Pre-treating the wooden windows: This treatment protects the wood from being rot due to moisture or water in the lower sash part of the window. One thing should be kept in mind: the pre-treatment should not be done on the side and the upper edges of the sash. Linseed oil is applied to the rabbet, which prevents the wood from absorbing excess oil from the putty.
#2 Priming of the sash: priming is necessary on the sash surface, excluding the side edges and front margin face. Prime should not be done especially on the glazing rabbets, if pre-treatment is already done on it. Firstly the primer should be applied on the surface of the glazing rabbets with a brush. This procedure is helpful to reach the inner corners of the glazing surface.
#3 Laying a bed of putty: in this process, the putty is applied on the glazing rabbet of a sash. This can be done by putting pressure through your fingertip or thumb. The applied putty to the outer edge of the glass pane helps to hold the glass to the frame. After that, excess putty is cut out carefully with the help of a knife.
#4 Setting points for glazing: this can be done easily and faster with the help of a point driver. The magazine is loaded with triangle or diamond points. After that, they are placed gently on the pane of the glazing rabbet by triggering with the spring-loaded mechanism. It is done carefully because putting pressure while triggering can break the glass of the window.
#5 Cleaning and polishing of the pane: after the application of putty on the pane, polish is needed. This is done to remove excess putty and dust from the glass. Dusting is done with a brush to clean the glass surface. One thing should be kept in mind: wearing a respirator and goggles is compulsory to protect nose, eyes, mouth, and lungs.
#6 Painting the putty and the sash: Last but the most important procedure of the Heritage Window Repair is to paint the putty and sash. Two coats of paint are applied to the sash with a painting brush. It seals the rainwater to get inside the glass putty, thus enhancing the durability of the putty. Waterproof paints or linseed oil paints are ideal for painting the putty and sash.
Final Words
At the end of the day, Heritage Window Repair can protect and preserve the windows of these historic buildings and monuments. However, one should prioritise timely maintenance and care to protect the window from any further damage. Each and every part of historic buildings denotes our culture and tradition that are fading day by day. They need to be preserved from demolishing. Heritage window repair involves a certain cost; however, the same cannot be ignored at any cor.
0 comments
Note: only a member of this blog may post a comment.